How to Put a Mobile Home on Your Land in Texas

By Justin·March 12, 2025·8 min read

Putting a manufactured home on your own land in Texas is one of the most rewarding investments a family can make — but it also comes with a process most buyers are never walked through. Here is exactly what to expect, in the order it happens.

1. Confirm Your Land Is Buildable

Before anything else, check three things with your county: (1) zoning allows a manufactured home, (2) the lot meets minimum acreage for a septic system (most TX counties require at least 0.5 acres for an aerobic system), and (3) there are no deed restrictions that prohibit manufactured homes. A 15-minute phone call to your county planning office will save you months of delay. Counties like Bexar, Travis, and Harris have specific overlays you need to know about.

2. Pull Your Texas Department of Insurance Installation Permit

Texas regulates manufactured home installation through the Texas Department of Insurance, Manufactured Housing Division. You will need a TDI Statement of Ownership (SOL) and an installation permit before the home is set. Your installer typically handles the permit, but you should verify it is filed. The fee runs about $35–$55.

3. Pick Your Foundation Type

Two main options in Texas: pier and beam (most common, $3,500–$7,000) or a concrete runner / monolithic slab ($8,000–$15,000). Pier and beam is faster and typically less expensive. Slab is more permanent and may have long-term insurance advantages, but adds 2–4 weeks to your timeline. If you want to retire the title under SB 785 and convert to real property, both foundation types qualify as long as they are properly anchored.

4. Get Utilities Hooked Up

Utility costs vary significantly depending on where in Texas your land is located. Realistic ranges:

Well drilling: $8,000–$20,000 depending on depth. East Texas tends to be shallower ($8k–$12k); West Texas can run higher because the water table is deeper.
Septic system: Conventional gravity systems run $6,000–$9,000, but most rural TX counties now require aerobic systems, which run $10,000–$18,000.
Electric service: $2,000–$5,000 if the pole is close. Add $1,500 per pole if the utility has to run new line.
Permits and inspections: $500–$1,500 total across utilities.

5. Site Prep and Pad

Before the home arrives, the ground needs to be cleared, leveled, and a compacted pad built. Cost: $2,000–$6,000 depending on how much dirt work is needed. If you are clearing trees, add another $1,500–$4,000.

6. Delivery and Set

The factory or dealer delivers the home in one or two sections. A crew sets it on the foundation, mates the halves (for double-wides), and anchors it. Typically 2–3 days of work, included in your home price if you buy through a dealer who bundles delivery and setup.

7. Final Inspection and Move-In

TDI inspects the install. The county inspects utilities. Once both sign off, you get a Certificate of Occupancy and you are home.

Total realistic timeline: 8–14 weeks from selecting your home to keys in hand, assuming utilities do not drag. Budget at least 25–35% of your home price for site work if you are starting from raw land.

Understanding the full cost picture upfront — home, site prep, utilities, permits — is the key to a smooth project. At Texas Homes Direct, we walk every buyer through all of it before any decisions are made, so there are no surprises down the road.